1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

???Whats your 1oz load???

Discussion in 'Shooting Related Threads' started by Brady509, Apr 6, 2013.

Thread Status:
Not open for further replies.
  1. Brady509

    Brady509 Well-Known Member

    Joined:
    Mar 20, 2012
    Messages:
    1,471
    Location:
    Odessa, Wa
    What's your all around 1 oz load?

    Powder, wad, hull, primer, shot size, fps?

    If you load a different one for each event please let me know what they are.

    Switch over to 1 oz recently now its mind over matter.

    Thank you all for your time,

    Brady Gies
     
  2. 687_SP_II

    687_SP_II TS Member

    Joined:
    Feb 1, 2008
    Messages:
    651
    STS / Gun Club hull, ClayDot Powder 17 gr., Cheddite primer, Blue Duster wad, #8 mag. shot. Shoot this for 16 yd and back to 22 yd.Hdcp. 1200 fps. It took me some time with the mind over matter thing.
     
  3. bossbasl

    bossbasl Well-Known Member

    Joined:
    Jan 20, 2013
    Messages:
    806
    Winchester AA, Win. 209, 18.3 Green Dot, CB1100-12 wad, #8 Mag. West Coast.
     
  4. Beretta Young Gun

    Beretta Young Gun Active Member

    Joined:
    Jul 9, 2007
    Messages:
    1,502
    Location:
    central ohio
    17gr 700x, 1oz #7.5, fio primer, AA hull, windjammer wad. 1175-1200fps. 16yd

    19gr solo 1000, 1oz #7.5, fio primer, STS hull, windjammer wad. 1200-1235fps. 27yd

    BYG
     
  5. OldGoat

    OldGoat Well-Known Member

    Joined:
    Nov 17, 2008
    Messages:
    1,567
    Location:
    Overland Park KS
    Virtually the same as 687 SP II above but with Win 209 primers and Downrange wads. Very effective load for trap as well as other games! Regards, Ed
     
  6. slide action

    slide action Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    4,917
    18 gr. promo 1 oz. # 8s i AA or STS hull.
     
  7. rautdr

    rautdr Member

    Joined:
    Sep 17, 2011
    Messages:
    79
    Location:
    wisconsin
    Remington nitro or sts hull. DR-xl-1 wad. 17.1-17.3 grains of E3. Win. 209

    Dan from Wis.
     
  8. Uncle Screech

    Uncle Screech Member

    Joined:
    Oct 11, 2008
    Messages:
    224
    I load 22 grains of PB into a Federal GM hull, Winchester 209, Fed 12S0 wad and 7.5's. Gives me approximately 1200 fps and I use this for everything.
     
  9. j2jake

    j2jake Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    2,287
    STS, most any 11/8 wad, cheddite primer, 71/2 or 8 and 18.5 Green Dot. Grinds em and soft shootin. Jake
     
  10. Mark Stacklin

    Mark Stacklin Member

    Joined:
    Aug 11, 2012
    Messages:
    87
    I load 17 grains of E3 in AA hulls fiochhi primers cb8100 or drrt wads with 7.5 shot for 16 yards and 22 grains of green dot in Remington hulls with drxl 1 wads fiochhi primers and 7 shot for handycaps.
     
  11. OhioSkeetShooter

    OhioSkeetShooter Member

    Joined:
    Feb 13, 2013
    Messages:
    51
    Location:
    Ohio
    AA/STS/Gun Club hulls with 16.8 gr of Clays, Win 209 primer, WAASL wad (CB or DR clone), and an ounce of 7.5's for trap and 9's for skeet. 1180 FPS with little recoil.
     
  12. bigeoj

    bigeoj Member

    Joined:
    Oct 11, 2010
    Messages:
    355
    STS/Nitro hull, Cheddite primer, Windjammer II wad,#8 shot 17gr. Red Dot for 16-20yds,1200fps, 18.5 Red Dot for 21-24yds. 1250 fps. Started using these the middle of last summer. Some good scores, some not so good but hey I had good and bad days with 1 1/8. Joe
     
  13. arend003

    arend003 Member

    Joined:
    Sep 29, 2008
    Messages:
    265
    Estate hulls, windjammer wad fio primers and 16.5 grains Promo
     
  14. FLIP

    FLIP Member

    Joined:
    Jan 29, 1998
    Messages:
    684
    STS hull / 16.2 Nitro 100/ TGT wad /Fiocchi primer/1200FPS
     
  15. zzt

    zzt Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    3,460
    Location:
    SE PA
    STS hull, W209 primer, 17gr e3, TGT-12 wad, 1oz #8 WCM shot. 1194fps @ 7600psi according to the Lyman 5th edition manual. Substituting an STS209 primer drops fps by 3 at the same pressure.

    I've tried many, many other 1oz loads, and will probably continue to do so. However, I always end up returning to this one.
     
  16. Oregunner

    Oregunner Well-Known Member

    Joined:
    Aug 15, 2006
    Messages:
    3,335
    Location:
    Oregon
    Remington hulls, enough ClayDot powder for 1200 fps, and some other stuff that's less important. Mark
     
  17. dhip

    dhip Active Member

    Joined:
    Nov 14, 2009
    Messages:
    1,473
    Location:
    westgrove,Pa.
    Same as J2Jake except any hull.

    Doug H (pa)
     
  18. ntgr8

    ntgr8 Member

    Joined:
    Jan 29, 2010
    Messages:
    681
    17 loads and only 1 is using red dot.! I use red dot for everything, should I look at a different powder?
     
  19. jarhead_59

    jarhead_59 TS Member

    Joined:
    Jan 29, 1998
    Messages:
    1
    AA-STS-Federal hulls 17.1 Red Dot CB1100-12 1oz. of Mag 8
     
  20. Avaldes

    Avaldes Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    1,876
    Location:
    Central Coast of California
    STS hull, TGT12 wad, R209 primer, 18gr of Clays and 1oz of either 8's or 8.5's.

    I also substitute Windjammer 1oz wads with this recipe. Both are excellent singles loads and easy on the shoulder.
     
Thread Status:
Not open for further replies.
Search tags for this page

nitro 100 trap loads