1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Value of 3200 premier trap ???

Discussion in 'Shooting Related Threads' started by nanuk, Oct 26, 2008.

Thread Status:
Not open for further replies.
  1. nanuk

    nanuk TS Supporters TS Supporters

    Joined:
    Jan 29, 1998
    Messages:
    579
    Location:
    Florida
    Hey folks---looking for some direction here.. I have a remington 3200 premier trap (straight stk-not M/C) that appears unfired (appears to have been assembled---however no marks on the breach face that indicate it has been fired. Has the rem plastic case that also appears the foam has been changed.
    I'm told 500 of these guns were made for europe and this gun has the factory paperwork and a gov. form for a lt. col. that registered it in Torrejon air base (spain)in Dec.1982-(checked in and never took it out to shoot it). Metal is 100%---wood is 99.9% (a couple very slight handling marks---and very nice wood ! This was not one of the guns that was sent off for "special engraving"---however it was hand engraved by Remington. My question,--whats the approx. value as I'm looking to sell. Serial # is RPI74XXX.
    I don't have a bluebook and appreciate any input---thx Bob
     
  2. showdawg

    showdawg TS Member

    Joined:
    Jan 29, 1998
    Messages:
    163
    100% Gun books for $2900.00 , 98% = $2500.00


    Bud Wilson in Alabama
     
  3. Mike Battista

    Mike Battista Well-Known Member Supporting Vendor

    Joined:
    Jan 29, 1998
    Messages:
    3,956
    This is from the Book
    MODEL 3200 PREMIER
    - 12 ga., sold through Remington's International Division, 500 mfg. 1975 only, patterned after "One of 1000" series, regular or Monte Carlo stock.
    Grading 100% 98% 95% 90% 80% 70% 60%
    $2,900 $2,500 $2,150 $1,800 $1,500 $1,200 $1,025
    Add 125% for engraving (only 116 mfg., engraving was done in Belgium
    Mike Battista
     
  4. nanuk

    nanuk TS Supporters TS Supporters

    Joined:
    Jan 29, 1998
    Messages:
    579
    Location:
    Florida
    Bud---Mike
    thank you for the info.
    regards
    Bob
     
  5. bfre49849

    bfre49849 Member

    Joined:
    May 10, 2009
    Messages:
    53
    Is the gun for sale?
     
  6. nanuk

    nanuk TS Supporters TS Supporters

    Joined:
    Jan 29, 1998
    Messages:
    579
    Location:
    Florida
    Yes, this gun is for sale--can have pics in a few days(super wood) and receiver has been updated. Let me know if you would like pics.
    regards
    Bob
     
  7. 3200GB

    3200GB Member

    Joined:
    Oct 17, 2008
    Messages:
    35
    Location:
    Chino, Ca
    please send pictures & price when you can. thanks gary bachenberg
     
  8. Robb

    Robb Member

    Joined:
    Jan 29, 1998
    Messages:
    827
    Pics as well please.
     
  9. senior smoke

    senior smoke Well-Known Member

    Joined:
    Sep 30, 2007
    Messages:
    7,566
    Location:
    Wauwatosa Wisconsin
    what is the barrel length?
    steve balistreri
     
  10. nanuk

    nanuk TS Supporters TS Supporters

    Joined:
    Jan 29, 1998
    Messages:
    579
    Location:
    Florida
    To folks that have requested additional info:

    Barrels are 30"--IM/Full

    Receiver has been updated-lite dot in serial # area and more importantly,2 allen screws in breach face.

    Still working on getting pics and if I have dificultly loading them is there someone who could post them for me?

    thanks for you patience
    Bob
     
  11. nanuk

    nanuk TS Supporters TS Supporters

    Joined:
    Jan 29, 1998
    Messages:
    579
    Location:
    Florida
    I believe pics were sent to all that requested them--please let me know if you didn;t receive them.
    regards
    Bob
     
Thread Status:
Not open for further replies.