1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

valmet 412

Discussion in 'Shooting Related Threads' started by raymerlo, Jul 20, 2010.

Thread Status:
Not open for further replies.
  1. raymerlo

    raymerlo Member

    Joined:
    Sep 5, 2008
    Messages:
    38
    Came across a valmet 412 trap model,It has ejectors and I want to change to
    extractors,came across a trapshooters.com site from 2007 but could not
    glean any info on how to do the switch,any advice would be helpfull,
    also any info on where to get parts if needed would help...Thanks RAY
     
  2. mike b.

    mike b. Member

    Joined:
    Jan 29, 1998
    Messages:
    286
    I think this can be done by removing the springs under the extractors. Remove u- shaped clip screw and then clip. Push ejector forward and pull front end out and slowly let the spring push it back and out. Remove spring, repeat on other barrel. Then replace ejector, replace u- clip and screw. (save springs) If this doesn't do it , cut off 2 coils at a time from the spring until the ejectors work as desired.
     
Thread Status:
Not open for further replies.
Search tags for this page

change 412 st to extractor

,
valmet 412 extractor