1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Trigger Conversion For Inertia Triggers

Discussion in 'Uncategorized Threads' started by timb99, Aug 15, 2007.

Thread Status:
Not open for further replies.
  1. timb99

    timb99 Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    7,332
    Location:
    Shawnee, Kansas, USA
    Need to get my interial trigger to work with my .410 companion tubes. It works fine with 28 gauge, but not .410.

    Besides Briley and Midwest Gun Works, who does this work?

    I have a local gunsmith who says he can do it, but I'm wondering if going to a bigger name is a better idea.

    Tim
     
  2. cueguy2

    cueguy2 TS Member

    Joined:
    Jan 29, 1998
    Messages:
    225
    I had Cole do my Beretta. Very nice work. Nubs Wagner.
     
  3. GunDr

    GunDr Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    2,913
    If it's a Browning that you have, I can take care of that for you. It's the same conversion that Kolar has used on probably a 1000 Citori's that got small gauge tubes.

    If it's a Beretta 68x series of gun, I would recommend Kolar for the mechanical conversion. They were the first to convert the Berettas, and they are still "fail-proof".

    *Just a note--Most trigger conversions do not include trigger "tuning up". It can be requested, and it does add to the cost.

    Doug Braker
     
  4. timb99

    timb99 Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    7,332
    Location:
    Shawnee, Kansas, USA
    Doug,

    You have mail.
     
  5. g7777777

    g7777777 TS Supporters TS Supporters

    Joined:
    Jan 29, 1998
    Messages:
    9,353
    Kolar does

    no local gunsmiths would be my thought

    regards from Iowa

    Gene

    PS- Kolar actually has two differen conversions as I remember-- and I dont remember which, maybe both, they dont convert it to a true mechanical, only lighten the intertia block
     
  6. neo

    neo Member

    Joined:
    Jan 29, 1998
    Messages:
    248
    Location:
    NE Ok.
    If it is a Browning, order a 28-.410ga. trigger return spring for about $2.00 from Browning and your .410 tubes should work. This spring returns the trigger and also controls the inertia block. neo
     
  7. MGeslock

    MGeslock TS Member

    Joined:
    Jan 29, 1998
    Messages:
    359
    MY browning I had 410 springs installed by Kolar. Works well with subgauge tubes!
     
Thread Status:
Not open for further replies.
Search tags for this page
convert browning citori to mechanical trigger
,
convert browning to shoot tubes
,

convert citori to shoot tubes

,
how a citori inertia trigger works
,
how convert a citori to a mechanical trigger
,
how do inertia triggers work
,
how to lighten the inertia block on citori
,
howdoes browning inertia block work