1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Timney1100help

Discussion in 'Off Topic Threads' started by VortexVrill, Feb 18, 2013.

Thread Status:
Not open for further replies.
  1. VortexVrill

    VortexVrill TS Member

    Joined:
    Feb 13, 2013
    Messages:
    2
    Have a Timney trigger for my grandsons 1100 Trap-T. The factory trigger works fine, although with the Timney it shoots for a while then it decided to go into a mode where when the trigger is pulled it will pull and nothing happens. The gun does not go off or anything although it makes me nervous, so he shoots the factory, but shoots the Timney better. What part of this trigger is not doing what this factory trigger does.
    VV
     
  2. extrapper84

    extrapper84 Member

    Joined:
    Aug 17, 2011
    Messages:
    337
    Location:
    Rio Rancho, NM
    You might get more response, if you posted this request on; SHOOTING RELATED
    TOPICS.

    Just saying

    Hal
     
  3. leftex

    leftex Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,172
    Location:
    South of Dallas
    I have one that does the same thing. Also interested in a fix.
     
  4. Trapmanjohn

    Trapmanjohn Member

    Joined:
    Jan 29, 1998
    Messages:
    364
    If the sear spring is too weak an 1100 will not fire. The hammer will not be released from the sear.

    Hit 'em hard,

    John
     
  5. alant

    alant TS Supporters TS Supporters

    Joined:
    Jul 22, 2007
    Messages:
    1,200
    Have you tried cleaning it. If it's real dirty, the sear will not release from the hammer.

    Thanks, Alan
     
Thread Status:
Not open for further replies.