1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

This stuff is increditable!!!

Discussion in 'Off Topic Threads' started by Trap2, Apr 13, 2013.

Thread Status:
Not open for further replies.
  1. Trap2

    Trap2 Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    3,685
    Location:
    Redding, California
    Check out the website above.... This is really amazing stuff....
     
  2. Hap MecTweaks

    Hap MecTweaks Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    9,229
    Location:
    Mesquite, Nevada
    Dan, it is some magical stuff but check out the price list too?? They are extremely proud of their product!!

    Hap
     
  3. Leo

    Leo Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    3,051
    Cool stuff, With work gloves or boots, I wonder if it wears off?
     
  4. Unknown1

    Unknown1 Well-Known Member

    Joined:
    Nov 5, 2009
    Messages:
    3,402
    The demo video makes it look a lot more practical than it is; I've seen it in use.

    As a waterproofer, it's only as good as the substrate it's applied to. If the substrate moves or cracks, the water proofing is compromised because the coating doesn't self-heal.

    It's also not tolerant of abrasion so putting it on a pair of work boots or gloves would work only until the leather started to get scuffed and the coating was breached.

    It might make a good rustproofer for metals not subjected to wide temperature extremes but right now it's a technology in search of uses.

    Keller
     
  5. Trap2

    Trap2 Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    3,685
    Location:
    Redding, California
    It's in its infancy, to be sure, but the possibilites are endless if it can overcome some of the obstacles that are obvious right now... Dan
     
  6. senior smoke

    senior smoke Well-Known Member

    Joined:
    Sep 30, 2007
    Messages:
    7,577
    Location:
    Wauwatosa Wisconsin
    Spray the inside of a gun barrel. I would think the fps would increase of any load as well as no rust on any guns. Endless possibilities.
    Steve Balistreri
     
  7. oldschool

    oldschool TS Member

    Joined:
    Oct 17, 2011
    Messages:
    23
    Steve, Maybe but I would think you would need a powder with a faster burn rate.
    Also if that was true you would need new data.
     
Thread Status:
Not open for further replies.