1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Target Requirements for WI. and IA ?????

Discussion in 'Shooting Related Threads' started by scott calhoun, Jun 20, 2011.

Thread Status:
Not open for further replies.
  1. scott calhoun

    scott calhoun Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    1,413
    Location:
    Chicago area
    The simple answer is that each state makes its own rules for target requirements. There is no requirement set by the ATA for all states.
     
  2. Donm

    Donm Active Member

    Joined:
    Jan 29, 1998
    Messages:
    873
    If you are a new shooter this year you are correct about Wi. If you just didn't shoot in 2010 but shot before then you need 1000 Singles and Hdcp. and 600 in Doubles. Not sure about Iowa.
     
  3. scott calhoun

    scott calhoun Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    1,413
    Location:
    Chicago area
    I looked at the Iowa program and it indicates you need 500/500/500 to avoid penalty, unless you are a SubJr/Jr/Vet/SrVet. However, I couldn't find anything that indicated the time period during which those targets had to be shot.

    My read of the Wisconsin program is that you will need 1000/1000/600 in 2010/2011 combined, of which at least 500/500/300 must be in the 2011 target year. The exception is a new shooter for 2011 will only require the 500/500/300. Keep in mind it's a new shooters (i.e. joined in 2011) not someone who didn't shoot any targets in 2010. If you were an ATA member in 2010 or prior you would need to meet the 1000/1000/600 and the 500/500/300.

    Again, my interpretation. Your mileage may vary.

    Scott
     
Thread Status:
Not open for further replies.