1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

stock removal

Discussion in 'Shooting Related Threads' started by shubble72, May 29, 2009.

Thread Status:
Not open for further replies.
  1. shubble72

    shubble72 TS Member

    Joined:
    Dec 17, 2006
    Messages:
    364
    Im wanting to take the stock off my beretta 682 and also my remington 870 what do i need to use to do this?. Where can i buy one to have?
    Thanks
    Scott
     
  2. senior smoke

    senior smoke Well-Known Member

    Joined:
    Sep 30, 2007
    Messages:
    7,557
    Location:
    Wauwatosa Wisconsin
    to take off the 870 stock, you will most likely need to a phillips screw driver to remove the pad. use a long straight screw driver to remove the stock.
    that's it.
    steve balistreri
     
  3. phirel

    phirel TS Member

    Joined:
    Jan 29, 1998
    Messages:
    9,556
    It is also a good idea to use a small bit of lubricant on the screwdriver as you stick it through the recoil pad. This helps from enlarging the hole in the pad. If you don't have any lube handy, spit will work.

    Pat Ireland
     
Thread Status:
Not open for further replies.