1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
    Dismiss Notice
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Stock duplicator

Discussion in 'For Sale- Members only' started by twcpdc, May 12, 2010.

Thread Status:
Not open for further replies.
  1. twcpdc

    twcpdc Member

    0   1   0

    Joined:
    Feb 23, 2010
    Messages:
    600
    Location:
    Louisville
    I am intrestred in trying to find a used stock duplicator. I have some wood and would like to try my hand at building stocks. Is there one out there setting some where that I could get with out giveing up a arm and leg mabe just a leg. Thanks Tom
     
  2. Customstox

    Customstox Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    165
    There are a lot of people who will turn a stock for you on a duplicator and you can try your hand at stock making. There is a fairly long learning curve in using these machines. If you are doing a two piece stock you will also need something to drill a through bolt and often a lathe is used for its accuracy. Just a suggestion to ease your path to building stocks.
     
  3. Bernie K

    Bernie K Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    687
    I remember seeing one at Giacamos about 10 years ago, It was in a back room and Giacamo said he never used it. I don't know if they still have it but you might want to give Dan a call. Bernie
     
Thread Status:
Not open for further replies.