1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Springfield Model 944 misfires

Discussion in 'Shooting Related Threads' started by wildwind, May 2, 2011.

Thread Status:
Not open for further replies.
  1. wildwind

    wildwind TS Member

    Joined:
    Apr 20, 2011
    Messages:
    15
    I have a Springfield Model 944 that has had all the springs replaced and the firing pin checked but still misfires with both target and high brass field loads. Does anyone have any ideas. Thanks for the help.
     
  2. sterlingworth

    sterlingworth Active Member

    Joined:
    Mar 16, 2010
    Messages:
    787
    944,if i'am not mistaken is the single shot.Did you change out the hammer spring? Just for grins,With the gun unloaded,try holding the trigger and push forward on the hammer just to see if it will make contact with the fireing pin.Also do the same test with the barrel off and see if the firing pin protrudes from its hole enough to strike a primer.Just a few ideas to try .Ray
     
Thread Status:
Not open for further replies.
Search tags for this page

model 944 firing pin spring