1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Source of telescoping target setting poles?

Discussion in 'Uncategorized Threads' started by Neil Winston, Apr 2, 2007.

Thread Status:
Not open for further replies.
  1. Neil Winston

    Neil Winston Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    7,848
    The yellow ones with a bar across the top. Does anyone know where they come from?
     
  2. $2-Roy

    $2-Roy TS Member

    Joined:
    Jan 29, 1998
    Messages:
    3
    Use the pole that was made to clean swimming pools.Remove the net from the strainer and throw targts thru the opening.
    Roy Green
     
  3. BeerKing

    BeerKing Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,203
    I made one out of PVC pipe. We have 7 traps and of course each one is a different elevation by a few inches. I simply drilled holes through the sliding part and run a pin through to set the height for each trap. 2" outsided and 1 1/2" insided with a T and 3 caps. Simple and easy. BK
     
  4. Patrick Haskins

    Patrick Haskins Member

    Joined:
    Jan 29, 1998
    Messages:
    557
    Go to your local home improvement store and buy a extending paint pole. Then just screw a cross piece to it.
     
  5. break25

    break25 TS Member

    Joined:
    Jan 29, 1998
    Messages:
    217
    BEERKING, Does that meean after setting the feet height the last foot is drilled by inches for the adjustment?

    CHAZZ
     
Thread Status:
Not open for further replies.