1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Solo 1000 load data for Fed Papers

Discussion in 'Shooting Related Threads' started by todd farris, Aug 22, 2010.

Thread Status:
Not open for further replies.
  1. todd farris

    todd farris TS Member

    Joined:
    Jan 29, 1998
    Messages:
    107
    Does anyone have load data for Solo 1000 using a Fed Paper hull with an 1 1/8oz load?

    todd
     
  2. Shooting Coach

    Shooting Coach Well-Known Member

    Joined:
    Sep 14, 2006
    Messages:
    8,351
    Location:
    Nashville Tn
    I have a manual with Fed paper listing. Let me know which primer and wad you have and I will send info for those components.
     
  3. WNCRob

    WNCRob Member

    Joined:
    Apr 10, 2007
    Messages:
    594
    I believe SOLO 1000 has recently been reformulated. Make sure that the formula is for the correct "version" of Solo 1000.

    WNCRob
     
  4. Shooting Coach

    Shooting Coach Well-Known Member

    Joined:
    Sep 14, 2006
    Messages:
    8,351
    Location:
    Nashville Tn
    Solo 1000 has been made in more countries than 22 ammo. Volume has changed several times, but burn speed and cleanliness has remained constant for shotshell loading.

    Nitro 100 HAS been changed, and handgun loading is not recommended with current data.
     
  5. Ljutic111

    Ljutic111 TS Member

    Joined:
    Jan 20, 2008
    Messages:
    1,730
    Don`t load it in 12ga but found a nice soft shooting load for 7/8 oz 20ga -- 11.3 gr of Solo 1000 .
     
  6. The Rock

    The Rock Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,491
    Email Accurate powder at the web site above they will supply you with any and all info you need.

    The current handbooks do not even list G/M hulls of any kind. They will send you an pdf file of the last handbook that does have them in it.

    But if you ask a specific question they will respond to your request.

    They were redoing all the load retesting and stopped before G/M data was collected.

    They told me in their response to my question that all the previous data listed in the older handbooks was accurate and safe.

    If you want to feel real safe contact them at the site above and get the real answer first hand.

    Rock

    Jim
     
Thread Status:
Not open for further replies.