1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
    Dismiss Notice
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

SOLD: S&W N-frame square-butt target stocks

Discussion in 'For Sale- Members only' started by AveragEd, May 25, 2012.

Thread Status:
Not open for further replies.
  1. AveragEd

    AveragEd Well-Known Member

    Rating - 100%
    1   0   0

    Joined:
    Jan 29, 1998
    Messages:
    5,475
    Location:
    Mechanicsburg, Pennsylvania
    These are currently on one of my 629s and fit perfectly but I found another set with a little more figure, so I'm selling these. There is one blemish on the right panel - it appears that it might have been scratched and the finish was repaired using a less-glossy material. I'll point that flaw out in detail in the last photo.


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    If you look closely at this next photo, at about 11:00 from the sideplate screw you'll see a very slight little 1/8" - 1/4" line running upwards to the right across a dark stripe in the wood figure. That is the scratch and about a half-inch or smaller area around it is not as glossy as the rest of the wood.


    [​IMG]


    I'm probably making a mountain out of a molehill but would rather make it sound worse than it actually is instead of the other way around.

    $100 shipped to the "lower 48."

    Ed
     
  2. AveragEd

    AveragEd Well-Known Member

    Rating - 100%
    1   0   0

    Joined:
    Jan 29, 1998
    Messages:
    5,475
    Location:
    Mechanicsburg, Pennsylvania
    Weekend special - $90 shipped. If they don't sell by Monday, I'll let them lounge in my safe and appreciate in value. Look on eBay and GunBroker for anything for a square-butt N-frame, especially target stocks. You'll find ones with plain wood or in rough condition or both with asking prices of $130 to $150!

    Ed
     
  3. AveragEd

    AveragEd Well-Known Member

    Rating - 100%
    1   0   0

    Joined:
    Jan 29, 1998
    Messages:
    5,475
    Location:
    Mechanicsburg, Pennsylvania
    Sold - thanks for the inquiries.

    Ed
     
Thread Status:
Not open for further replies.