1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Setting up K80 TS o/u barrels???

Discussion in 'Shooting Related Threads' started by Ron Burdick, Jun 14, 2012.

Thread Status:
Not open for further replies.
  1. Ron Burdick

    Ron Burdick Active Member

    Joined:
    Jan 29, 1998
    Messages:
    770
    Location:
    Duncan, SC
    When setting up a K80 TS, which barrel do you start with the top or bottom?

    Ron Burdick
     
  2. ScottEslick

    ScottEslick Member

    Joined:
    Aug 5, 2009
    Messages:
    351
    Location:
    Waynesboro, PA
  3. Bob Hawkes

    Bob Hawkes Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    3,916
    Good question Ron where you can move both. My thinking would be the top barrel and then the bottom barrel becomes a hanger change if needed.
     
  4. Kemper

    Kemper Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,003
    Ron, make them both shoot in the same place, which should be about 7" high, then use the rib to raise the point of impact. I think you will find if you use it for doubles, you will need the POI lower than your single barrel. This is if your single barrel shoots more than 12".

    Barry Kemper
     
Thread Status:
Not open for further replies.