1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Seitz eject to extract

Discussion in 'Shooting Related Threads' started by Country Squire, Apr 16, 2009.

Thread Status:
Not open for further replies.
  1. Country Squire

    Country Squire TS Member

    Joined:
    Jan 29, 1998
    Messages:
    106
    A friend just got a used Silver Seitz and wants to change it from ejecting to extracting only. I thought I saw a previous thread about cleaning a Seitz ejector,but can't find it.I'm shure we can figure it out,but if someone can give us instructions it would be much easier. Thanks George.
     
  2. rennerize

    rennerize Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,925
    Punch the pin out and remove the ejector finger.
    Don
     
  3. KEYBEAR

    KEYBEAR Active Member

    Joined:
    Jan 29, 1998
    Messages:
    3,222
    And remember that part is over 100 bucks to replace
     
  4. GBatch_25

    GBatch_25 Active Member

    Joined:
    Apr 1, 2008
    Messages:
    2,339
    Location:
    Illinois
    Click on the above URL to bring up a schematic. I believe the gun should be in a fired state.

    Pin # 40 can be knocked out with a punch. Once it is knocked out, the extractor (# 11) and spring (# 41) can be removed and cleaned. When clean, reassemble. I don't know how to stop the gun from ejecting. You may need a weaker spring to simply move the fired shell out of the chamber for extraction.

    Gene Batchelar
    Wheaton, IL
     
  5. Country Squire

    Country Squire TS Member

    Joined:
    Jan 29, 1998
    Messages:
    106
    Thanks for the replys. We figured it out. It's easy Thanks again. George
     
Thread Status:
Not open for further replies.