1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Screwdriver for Citori forend

Discussion in 'Off Topic Threads' started by ke4yyd, Jul 17, 2010.

Thread Status:
Not open for further replies.
  1. ke4yyd

    ke4yyd Member

    Joined:
    Jul 15, 2006
    Messages:
    323
    What size screwdriver is required for the very narrow slotted Citori forend? Best place to buy?
     
  2. halfmile

    halfmile Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    15,649
    Location:
    Green Bay Wisconsin
    You need a good set of gunsmith drivers. They are sold at the mail order firms like Midway if you can't find them locally.

    I was lucky, found a 4 way with a wide blade, and ground it to fit.

    Now I lost it and have a set of Chapman drivers. Cost 13.95.

    I suppose you could find or grind a regular scredriver and dedicate it to the Citori but the set is the way to go since it has hex and tox also.

    HM
     
  3. arend003

    arend003 Member

    Joined:
    Sep 29, 2008
    Messages:
    265
    itis a number 10 Foster(sp) I used a feeler gauge to measure the slot and then ordered the correct screw driver for it .
     
  4. HSLDS

    HSLDS Well-Known Member

    Joined:
    Nov 2, 2006
    Messages:
    6,400
    Location:
    S-E PA
    Brownells sells a set that covers the whole range of thin bits for European firearms...
     
  5. ke4yyd

    ke4yyd Member

    Joined:
    Jul 15, 2006
    Messages:
    323
    I ordered a #10 screwdriver from Foster. It appears to be the right one.

    Thanks everyone.
     
  6. JerryP

    JerryP Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,753
    Brownells 340-2. I have a large set from Brownells and had to get it seperately.
     
Thread Status:
Not open for further replies.