1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

S@W 20 GUAGE /MOD 1000

Discussion in 'Shooting Related Threads' started by snarepeg, Jul 2, 2009.

Thread Status:
Not open for further replies.
  1. snarepeg

    snarepeg TS Member

    Joined:
    Aug 2, 2006
    Messages:
    38
    Aquired one of these in nice condition but with a problem.
    It shoots, it ejects good and it feeds in next shell.
    It will not fire next round due to hammer failing to engage as trigger is still in fire mode and part that over rides this is worn/or broke??
    Part no 83 seems to be the culprit.
    Any help on this one much appreciated, going to try and build it up with weld to prove or otherwise. also choke stamped 3,what have i got ?????. john
     
  2. twoatlow8

    twoatlow8 Member

    Joined:
    Feb 22, 2008
    Messages:
    411
    The source for parts on these guns is http://www.lsgmfg.com/
    They have everthing you will need.
    Good Luck!
    Scott
     
  3. nspktr1

    nspktr1 TS Member

    Joined:
    Jul 2, 2006
    Messages:
    336
    3==IC
     
  4. skeetjunkie

    skeetjunkie TS Member

    Joined:
    Apr 15, 2007
    Messages:
    25
    The auto safety spring is either missing or installed upside down. I've had two S & W 1000's and, unbelievably, both of them behaved exactly as you have described when I bought them. In one case the spring was missing completely and in the other it was installed upside down. It was easy to get the spring installed wrong but quite difficult to install it correctly.
     
Thread Status:
Not open for further replies.