1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.

Ruger Blackhawk 45 l.c./ 45acp F/S /sold

Discussion in 'For Sale' started by Dbl Auto, Feb 23, 2012.

Thread Status:
Not open for further replies.
  1. Dbl Auto

    Dbl Auto Active Member

    0   0   0

    Joined:
    Jul 6, 2009
    Messages:
    1,188
    Location:
    NW Ohio
    New model or 3 screw?
    Doug Allison
     
  2. AAtrap

    AAtrap Active Member

    0   0   0

    Joined:
    Jul 16, 2006
    Messages:
    1,216
    Location:
    Nebraska
    Might be interested depending on Model as mentioned in the last post and if it has the 4 5/8 in. bbl.

    Steve
     
  3. trapshootin hippie

    trapshootin hippie Well-Known Member

    Rating - 100%
    1   0   0

    Joined:
    Apr 9, 2007
    Messages:
    3,181
    Anyone ever see a 3 screw convertable? Just asking.

    GneJ
     
  4. Old Texas Marine

    Old Texas Marine Member

    0   0   0

    Joined:
    Apr 6, 2008
    Messages:
    529
    Hippie,

    Yes,

    I own or have owned all three calibers: 22/22 Mag, 38/357/9MM, 45 Colt/45ACP.

    HBT
     
  5. wolfram

    wolfram Well-Known Member

    0   0   0

    Joined:
    Jul 17, 2007
    Messages:
    5,764
    Yep - and I had a three screw Blackhawk that was .357/9mm. I converted that gun into a .44 special and sold the 9mm cylinder off.

    But if Mac's .45 is a three screw then he is offering a pretty good deal.
     
  6. WCW4269

    WCW4269 Member

    0   0   0

    Joined:
    Feb 7, 2011
    Messages:
    82
    What about the .32-20/.32H&R mag & the 10MM/.38-40'S???
     
  7. wolfram

    wolfram Well-Known Member

    0   0   0

    Joined:
    Jul 17, 2007
    Messages:
    5,764
    Is it a three screw Mac?

    Look at the loading gate side of the frame and if it is a three screw there will be three screws that go through the frame. If it is a new model there are just pins that go through the frame - no screws. This is an important factor in the value of your gun.
     
  8. SPW895

    SPW895 Member

    Rating - 100%
    1   0   0

    Joined:
    Oct 15, 2009
    Messages:
    189
    PM sent Stan
     
Thread Status:
Not open for further replies.