1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

roll crimp hulls

Discussion in 'Shooting Related Threads' started by ricks1, May 7, 2010.

Thread Status:
Not open for further replies.
  1. ricks1

    ricks1 TS Member

    Joined:
    May 7, 2007
    Messages:
    1,545
    Have a Question
    I have tried about everything that comes to mind. So will ask if any of you have tried to put a star crimp on a fired roll crimped hull? The hull will not take a normal crimp.
     
  2. goatskin

    goatskin TS Member

    Joined:
    Jun 24, 2009
    Messages:
    1,781
    While there are some 'depends' on the brand of hull & it's composition, that is more a function of the kind & quality of crimp-starter you have and which reloader you're using.

    If you're using MEC, with the new, plastic ball-bearing Spindex, it will be nearly impossible to make a crimp, either 6- or 8-point from a previously rolled hull.

    You'll need one of these gizmos:


    [​IMG]


    Either Ballistic Products or Precision Reloading has them.

    BPI & PR also have chingasas you chuck in a drill and 'relax' & re-form the hull-mouth to make reloading easier.

    If you're reloading stuff like LE & tactical hulls, you'll need to skiv and re-form the mouth first. Most people chunk them as too much trouble.


    Bob
     
Thread Status:
Not open for further replies.