1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

RIO primer loaded needed

Discussion in 'Shooting Related Threads' started by FLAKETM, Jun 18, 2009.

Thread Status:
Not open for further replies.
  1. FLAKETM

    FLAKETM TS Member

    Joined:
    Jan 29, 1998
    Messages:
    458
    I'm looking for a good, light one oz load using a RIO primer with either Green Dot or Clays. Anybody got such??
     
  2. Quack Shot

    Quack Shot Active Member

    Joined:
    Mar 14, 2006
    Messages:
    4,003
    Mash the link above. It's the ONLY reliable data that seems to have been published for the Rio Primers. Just be real careful about the pressures. Some of the loads are quite hot and over my personal comfort levels. There is one at 11,580 PSI, which is way too hot for comfort. Stay with the loads under 10K EXACTLY as written and you should be ok.
     
  3. BigM-Perazzi

    BigM-Perazzi Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    8,542
    Location:
    HELL, MICHIGAN
    16.5 gr claydot, rio primer, downrange xl 1 wad AA or STS hull..

    Rio's load like Federal 209A primers, hot.
     
  4. FLAKETM

    FLAKETM TS Member

    Joined:
    Jan 29, 1998
    Messages:
    458
    Thanks for the load and thanks for the chart.
     
Thread Status:
Not open for further replies.