1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Replacing a Perazzi Trigger Spring?

Discussion in 'Uncategorized Threads' started by david, May 10, 2008.

Thread Status:
Not open for further replies.
  1. david

    david Member

    Joined:
    Jan 29, 1998
    Messages:
    187

    [​IMG]

    Take spring tool install as shown push down on spring and slide bridle off. Insert new spring apply tool and move bridle over end of spring.

    David
     
  2. Allen-MX8

    Allen-MX8 Member

    Joined:
    Jan 29, 1998
    Messages:
    618
    Don't you mean the Hammer Spring?
    eak...
     
  3. deking00

    deking00 Member

    Joined:
    Jan 29, 1998
    Messages:
    97
    [​IMG]

    You will need to drive the pin out that holds the hook in place. Drive it about half way in from the side with the broken spring and remove the hook. Watch for the spring that is under the hook. Then you can follow the above instructions.
     
Thread Status:
Not open for further replies.
Search tags for this page

replacing leaf spring in perazzi

,

replacing trigger spring in bt99 shotgun