1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Remington model 31 owners

Discussion in 'Shooting Related Threads' started by Hitapair, Aug 9, 2009.

Thread Status:
Not open for further replies.
  1. Hitapair

    Hitapair Active Member

    Joined:
    Jan 29, 1998
    Messages:
    2,344
    Release triggers are out there but they aren't offered for sale real often. I think the buttstocks may be interchangeable. Haven't tried it but recall reading it on here.
     
  2. cubancigar2000

    cubancigar2000 Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    10,521
    Location:
    Idaho
    The 31 trigger is one of the most complex triggers ever made and few gunsmiths ever accomplished a decent release trigger, the ones that did are dead and gone. There are two types of triggers, early and later guns. IMO the early is the best and can be identified as a non tang trigger ( it does not have a tang extending into the stock and is all steel) I once had Allem work on a 31 trigger at the Grand, so you may call them?
    semper fi
    [​IMG]
     
  3. esetter

    esetter Active Member

    Joined:
    Dec 14, 2007
    Messages:
    1,440
    My friend has two 31's with release triggers. Contact me through email and I'll give you his number.
     
  4. Auctioneer

    Auctioneer Well-Known Member

    Joined:
    Jul 5, 2009
    Messages:
    4,966
    I have 2 12ga 16 and a 20 They are great guns.
     
  5. 333t

    333t Member

    Joined:
    Jan 29, 1998
    Messages:
    281
    Fred:

    None of the parts interchange between the 870 and 31 including the wood. I don't know about release triggers but the 31 trigger (small and large guard) is not the greatest. They tend to be a little mushy and toggle upward when the sear is released. In my opinion the best one is the all steel large guard trigger on the later type 41 models.

    Phil
     
Thread Status:
Not open for further replies.