1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Rem. 3200 Adjstable P.O.I. ?

Discussion in 'Uncategorized Threads' started by jbisinger, Jan 10, 2008.

Thread Status:
Not open for further replies.
  1. jbisinger

    jbisinger Member

    Joined:
    Jan 10, 2008
    Messages:
    37
    Has anyone modified a Rem. 3200(with bbl. hanger(s)) to obtain an adjustable P.O.I. ala the Krieghoffs? I can't theorize how this works for Krieghoff since it seems the hanger(s) will simply push both bbls. apart but apparently it does work. Anyway- is it feasible that a gunsmith could accomplish this on the less expensive 3200? Thanks in advance,
    Jack
     
  2. Beretta687EELL

    Beretta687EELL Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    2,732
    The Kolar's have a wedge at the mid barrel point and a hanger on the front of the barrel. The combination of the variable thickness wedges and hangers adjust the POI of each barrel. Bill Malcolm
     
  3. hmb

    hmb Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    9,429
    The ajustment for POI for the K-80 and the 3200 are the same. The adjustment is made by changing the front hanger. The POI is changed for the lower barrel only. The lower barrel is changed and the upper is not because the upper barel is supported by the rib. Thin hangers make the lower barrel shoot higher and thick hangers make the lower barrel shoot lower.
    You don't need a gunsmith to do the job. A small hammer and a pin punch are the only tools you need. You can get the hangers from Laibs. HMB
     
Thread Status:
Not open for further replies.