1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Reloading question on a Mec 9000

Discussion in 'Shooting Related Threads' started by Shooting Jack, Apr 19, 2009.

Thread Status:
Not open for further replies.
  1. Shooting Jack

    Shooting Jack Active Member

    Joined:
    Jul 29, 2006
    Messages:
    3,523
    Location:
    Blackshear, Georgia
    I was reloading some Nitro 27 hulls and noticed that on the top rim of the completed shell was balooned out. Is this adjusted at the final station. I didn't find it in the manual and know I can call Mec tomorrow but wanted to load some more tonight. Jackie B.
     
  2. Jim101

    Jim101 Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,942
    Location:
    Knob Noster, Mo
    Yes, Adjust the final die down a 1/4 turn at a time till you get the taper that you need.





    Jim
     
  3. BDodd

    BDodd TS Member

    Joined:
    Jan 29, 1998
    Messages:
    3,594
    And you don't need a lot - just get some taper.....Bob Dodd
     
  4. Shady Creek

    Shady Creek TS Member

    Joined:
    Feb 5, 2006
    Messages:
    573
    1/32 down on the cam should do it......GOOD LUCK
     
Thread Status:
Not open for further replies.