1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

RCBS PRO-2000 Problems

Discussion in 'Shooting Related Threads' started by 90tee, Jan 20, 2010.

Thread Status:
Not open for further replies.
  1. 90tee

    90tee TS Member

    Joined:
    Jan 29, 1998
    Messages:
    21
    Just bought new RCBS PRO-2000. It is bridging powder (Varget) in the drop tube. No matter how slow I operate the handle. It will drop a 1/3 charge weight, and then an overcharge on the next casing. RCBS says to slow down, so I did. But it doesn't matter. Does anyone else know about this problem?
     
  2. warren

    warren Member

    Joined:
    Jan 29, 1998
    Messages:
    948
    Location:
    Fernley, Nevada
    Try grounding it. Not sure it'll work but sounds like it might.

    warren
     
  3. wireguy

    wireguy TS Member

    Joined:
    Jan 29, 1998
    Messages:
    3,715
    Pull the tube out and visually inspect the interior. Make sure you don't have a spider egg or something in there. Or a mud dauber nest. Or a Democrat who can't face that Camelot is history. Roll the powder around in the hopper. Is it sticking to the sides? Will the powder flow well through a funnel with a similar size constriction?
     
Thread Status:
Not open for further replies.
Search tags for this page
problems using excruded powder for rcbs 2000
,
problems with aps priming system on pro 2000 rcbs
,
problems with powder despencer on pro 2000
,
rcbs 2000 problems
,
rcbs pro 2000 bridging
,

rcbs pro 2000 problems

,
rcbs pro 2000 trouble
,

troubleshooting rcbs pro 2000