1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

ranger glass/frame question-help

Discussion in 'Shooting Related Threads' started by tcr1146, Feb 28, 2010.

Thread Status:
Not open for further replies.
  1. tcr1146

    tcr1146 Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    2,216
    I have a set of Ranger frames and 3 sets of lens- two sets of lens are perfect and one has a tiny scratch. How do I determine what frame size as I can find nothing on the frames or in the case? Thanks, Tom Rhoads
     
  2. Bird Grinder

    Bird Grinder Member

    Joined:
    Jan 29, 1998
    Messages:
    269
    Look on the inside of the frames at the hinge, they should be marked there on the right hand side.
     
  3. cunninmp

    cunninmp Member

    Joined:
    Nov 15, 2008
    Messages:
    639
    Tom,
    Go here to determine which frames you actually have.

    http://www.texasshootersoptical.com/

    Eye sizes go from 62mm to 72mm. Plus they have different curvatures.

    Hope this helps!

    Mike Cunningham
     
  4. tcr1146

    tcr1146 Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    2,216
    Thanks guys! I will check the site. For the poster advising me to look inside the frames, there is a number of 150 mm. I did not measure them, but that is close to 6 inches and I think that dimension is width or temple to temple?! Thanks again, and I will check the site. Tom Rhoads
     
Thread Status:
Not open for further replies.