1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

question- beretta 302 stock shims??

Discussion in 'Shooting Related Threads' started by acss, Nov 10, 2009.

Thread Status:
Not open for further replies.
  1. acss

    acss Well-Known Member Supporting Vendor

    Joined:
    Feb 7, 2006
    Messages:
    5,983
    Location:
    rock port, mo
    did the 302's) stocks ever come with stock shims, (probably on bolt end)? to adjust castoff ect.-- i know that newer versions did, but how about the 302? if so-- does anyone have a set?? ---- i called Midwest GunWorks and they didnt seem to know?! --- wally riebesell 660-744-4115
     
  2. EuroJoe

    EuroJoe TS Supporters TS Supporters

    Joined:
    May 3, 2008
    Messages:
    3,355
    Location:
    Rockford,IL
    Didn't have them until 303
     
  3. halfmile

    halfmile Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    15,643
    Location:
    Green Bay Wisconsin
    Yes, 303.

    You can grind the protrusion off and reverse one for double duty.

    HM
     
  4. acss

    acss Well-Known Member Supporting Vendor

    Joined:
    Feb 7, 2006
    Messages:
    5,983
    Location:
    rock port, mo
    does anybody have a full set for a 303 ( diff. MM sizes) they wud like to sell???
     
  5. acss

    acss Well-Known Member Supporting Vendor

    Joined:
    Feb 7, 2006
    Messages:
    5,983
    Location:
    rock port, mo
    good idea- i will PM him thanks
     
  6. Cheetah

    Cheetah Member

    Joined:
    Jun 8, 2008
    Messages:
    86
    Wally,
    Beretta AL-1 all the way thru the 303's used the same shims,the only exception were the trap models which had a round washer.
    If you change shims for example,if your stock is a Skeet or field configuration it came from Beretta with a 60 mm shim and if you change to a different numbered shim you also have to fit or rebed the stock where it meets the receiver.
    Hope this helps.
    Best Regards,
    Harold
     
  7. acss

    acss Well-Known Member Supporting Vendor

    Joined:
    Feb 7, 2006
    Messages:
    5,983
    Location:
    rock port, mo
    cheetah- thats what i thot! on 391's there is a shim at the reciever to adjust what you are talking about- thanks
     
  8. motordoctor

    motordoctor Shoji Tabuchi in Branson

    Joined:
    Jan 29, 1998
    Messages:
    3,688
    Location:
    ohio
    wally I don't think that the 301/2/3 guns had any shims in them. if you want to meove the stock I believe you have to offset it by grinding or releiving the wood and resetting the face against the receiver. That is what I had to do with mine. no room for a shim. They have a round hole in the stock and a flat washer to hold it in place. Please someone tell me if I am incorrect in this. motordoc
     
  9. acss

    acss Well-Known Member Supporting Vendor

    Joined:
    Feb 7, 2006
    Messages:
    5,983
    Location:
    rock port, mo
    motordoc- you right on the hole and washer in the stock- but i have a field grade stock that has an eliptical hole and an oblong shim that says "60". looking at it tho , i cant see how the thing wud flip over for offset. hole in stock is only oneway??
     
  10. motordoctor

    motordoctor Shoji Tabuchi in Branson

    Joined:
    Jan 29, 1998
    Messages:
    3,688
    Location:
    ohio
    thanks. might be that the field and trap are different. never had the field gun apart.
     
  11. Hap MecTweaks

    Hap MecTweaks Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    9,226
    Location:
    Mesquite, Nevada
    I bought a new B302 trapgun with a Monte Carlo stock from Gene Sears that had different degree shims between the stock/receiver, it also had special elongated washers for the stock spring tube/nut. The elongated washer was used when you raised/lowered the comb for desired POI. The stock hole was big enough to allow almost any adjustments necessary!

    I know I didn't buy a one of a kind as a friend in Bakersfield,CA had one exactly like mine!! There were no 303s at that time. I shoot a 303 today.

    Hap
     
  12. acss

    acss Well-Known Member Supporting Vendor

    Joined:
    Feb 7, 2006
    Messages:
    5,983
    Location:
    rock port, mo
    hey- HAP- you wudnt want to sell that 302 wud you???
     
  13. Hap MecTweaks

    Hap MecTweaks Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    9,226
    Location:
    Mesquite, Nevada
    If I had it back, I'd never sell it again!! 30 inch fixed full choke that hammered targets far beyond the concrete! Sorry acss. Hap
     
  14. acss

    acss Well-Known Member Supporting Vendor

    Joined:
    Feb 7, 2006
    Messages:
    5,983
    Location:
    rock port, mo
    now there is a good "thread" question!! if a trapshoter has a rock smoking gun- then why sell it???? who hasnt had a gun they shot really well and low and behold-- we sell it!!!!!
     
Thread Status:
Not open for further replies.
Search tags for this page

beretta 301 stock shim

,

beretta 301 trap shims

,

beretta 302 shim

,

beretta 303 drop shim

,

beretta 303 stock same all models