1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

PW Screw Size

Discussion in 'Shooting Related Threads' started by buckwheat, Nov 25, 2009.

Thread Status:
Not open for further replies.
  1. buckwheat

    buckwheat TS Member

    Joined:
    Jan 29, 1998
    Messages:
    156
    Would someone supply me with the sizes of the three (3). screws that secure the primer tray and feed ass'y on a model 800+? Thanks in advance.
     
  2. locdoc

    locdoc Member

    Joined:
    Jan 29, 1998
    Messages:
    874
    Location:
    Antrim, NH
    The 3 that secure the Tray and Track are as follows;

    The 2 at the top that hold the tray to the tool head are #10-32 X 3/8"

    The 1 that holds the bottom of the track to the primer assembly is a 10-32 X 1/4"

    If you mean the 3 that hold the metal cover over the primer ram and spring then those are #6-32 X 1/4"

    All are listed as "button head cap screw" or , bhcs.

    Available at any good hardware store.

    Doug Whiton, P/W dealer/dist
     
  3. whiz white

    whiz white Strong Supporter of Trapshooting Banned

    Joined:
    Jan 29, 1998
    Messages:
    4,771
    Location:
    Rapid City SD
    1/8" Allen wrench too, and use a drop of oil on the threads with the steel going into aluminum.

    WW
     
  4. buckwheat

    buckwheat TS Member

    Joined:
    Jan 29, 1998
    Messages:
    156
    Thanks for the good information.
     
Thread Status:
Not open for further replies.