1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
    Dismiss Notice
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

PW 900 w/hydro price check

Discussion in 'For Sale- Members only' started by skeeljc, Jun 15, 2010.

Thread Status:
Not open for further replies.
  1. skeeljc

    skeeljc Supporting Vendor Supporting Vendor

    Rating - 100%
    14   0   0

    Joined:
    Aug 27, 2007
    Messages:
    3,746
    Location:
    Terre Haute Indiana
    The used P/W 900 is worth $400 to $500 max. You can buy a new P/W Auto Drive for $800 shipped from Doug Whiton (Locdoc). The Auto Drive is way better than the hydro unit. It is very quiet and does not produce any heat.

    Jim Skeel
     
  2. DENNISMASTROLIA1

    DENNISMASTROLIA1 Active Member

    0   0   0

    Joined:
    Jun 11, 2007
    Messages:
    896
    The auto drive system as seen on the PW web site confuses me as to where the shells drop out from:it appears that there is no room for the shells to drop into a bucket or a container. Also the plate that the auto drive system is on will cover up the "drop hole" that I have in the reloading table. Could someone please explain? Thanks,Dennis
     
  3. MACH4RANDY

    MACH4RANDY Member

    0   0   0

    Joined:
    Feb 21, 2010
    Messages:
    702
    I HAVE A LIKE VG COND MEC 9000H WITH HYD UNIT AND PUMP 12 GA $650 PLUS SHIPPING FROM OKLAHOMA RANDY 405-990-7011
     
  4. skeeljc

    skeeljc Supporting Vendor Supporting Vendor

    Rating - 100%
    14   0   0

    Joined:
    Aug 27, 2007
    Messages:
    3,746
    Location:
    Terre Haute Indiana
    Dennis, there is a rectangular hole in the auto drive base plate. I had to remove an additional 1/8" to get my shell catcher to fit.

    Jim Skeel

    skeeljc_2008_030311.jpg
     
  5. skeeljc

    skeeljc Supporting Vendor Supporting Vendor

    Rating - 100%
    14   0   0

    Joined:
    Aug 27, 2007
    Messages:
    3,746
    Location:
    Terre Haute Indiana
    Here is another photo of the cut out in the Auto Drive base plate. The curved cut at the front of the rectangular hole is what I had to add to get my chute to fit.

    Jim Skeel

    skeeljc_2008_030333.jpg
     
Thread Status:
Not open for further replies.