1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

PW 800C station 1 tinkering

Discussion in 'Shooting Related Threads' started by sporting clay, Mar 5, 2013.

Thread Status:
Not open for further replies.
  1. sporting clay

    sporting clay Member

    Joined:
    Jan 29, 1998
    Messages:
    43
    I'm sure I'm not the first to do this but I installed a small magnet in the center on the ram. It holds the shell firmly with no shake as the shell enters the die. Before, the shell would sometimes wobble and would not enter the die straight and crumple the shell. This works so well I had to share.
    sportingclay_2008_030310.jpg
     
  2. Unknown1

    Unknown1 Well-Known Member

    Joined:
    Nov 5, 2009
    Messages:
    3,400
  3. shot410ga

    shot410ga Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    7,760
    I did that a good while ago. And it works great.
     
  4. whiz white

    whiz white Strong Supporter of Trapshooting Banned

    Joined:
    Jan 29, 1998
    Messages:
    4,771
    Location:
    Rapid City SD
    Been doing that for several years now for some of my customers.

    Unfortunately, can't be easily done with the hull feeder UNLESS you have the onc-piece shell seating post.

    WW
     
Thread Status:
Not open for further replies.