1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Pre-fit pad for Super X-1

Discussion in 'Shooting Related Threads' started by squirrelkiller, Jul 21, 2008.

Thread Status:
Not open for further replies.
  1. squirrelkiller

    squirrelkiller TS Member

    Joined:
    Apr 23, 2008
    Messages:
    353
    Wanting to buy a pre-fit pad for my youngest sons gun. I printed a template from Sims, part# 10111 (suggested pad) and traced the pad (marked trap on pad back) from the gun over it and there is a lot of difference. I can grind to fit, but would like to just screw one on. Kick-eze, Sims, .... one of the better pads. Would appreciate any information.

    Thanks,

    Rod
     
  2. squirrelkiller

    squirrelkiller TS Member

    Joined:
    Apr 23, 2008
    Messages:
    353
  3. claybrdr

    claybrdr Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    3,266
    Those stocks vary so much that you are unlikely to get one to prefit.
     
  4. rea5339

    rea5339 TS Member

    Joined:
    Mar 28, 2008
    Messages:
    25
    Try this one and print the templates and see if any work.

    http://www.precisionreloading.com/recoilpads.htm

    Ronnie
     
  5. squirrelkiller

    squirrelkiller TS Member

    Joined:
    Apr 23, 2008
    Messages:
    353
    Thanks for the replies. I thought it might be an easier project. Have a Monte Carlo and a straight trap stock and they both are the same. Thought it might be easy. I'll get the sander ready to go.

    Thanks,

    Rod
     
Thread Status:
Not open for further replies.