1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

PFS Ultimate Comb

Discussion in 'Shooting Related Threads' started by butcher, Nov 5, 2012.

Thread Status:
Not open for further replies.
  1. butcher

    butcher Member

    Joined:
    Jan 5, 2006
    Messages:
    558
    I have the PFS with the comb that comes on it but how much is the ultimate comb?
    What comes with it and how is it attached?
     
  2. mtimney

    mtimney TS Member

    Joined:
    Aug 2, 2012
    Messages:
    185
    You can check the online dealers for this info... see L&M lenses.

    I 'think' that you can purchase the ultimate comb aftermarket for about $200. If you're buying a new PFS stock then you can get it instead of the standard comb for about $130 more.
    Mark T.
     
  3. shot410ga

    shot410ga Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    7,787
    Problem, if you want the maximum castoff with the Ultimate Fit Comb: the aluminum bracket will hit you in the face. I had to make a new bracket out of 1" X 1" aluminum to alleviate the problem.
     
  4. mtimney

    mtimney TS Member

    Joined:
    Aug 2, 2012
    Messages:
    185
    shot410... You must really have the cast over VERY far. I have mine all the way and have no problems... but face shapes do vary. I'm not doubting what you say, just curious about it. PFS recommends the ultimate comb for people like you and me because you can cast it off more than the regular stock.
    Mark t.
     
  5. shot410ga

    shot410ga Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    7,787
    I have it as far as it will go, cast to the right. And a little part of the framework sticks out beyond the the comb, maybe 1/8-3/16. Problem solved with a 1 X 1" "L" shaped piece of aluminum from Home Depot. But, I do have a mill so, the work was a piece of cake, just a few slots.
     
  6. mtimney

    mtimney TS Member

    Joined:
    Aug 2, 2012
    Messages:
    185
    shot410..

    I can see that the framework does stick out. Maybe it's not biting me because I don't have the comb sticking up 90-degrees to the axis of the gun.
    mark t.
     
  7. shot410ga

    shot410ga Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    7,787
    Mine is straight up.
     
Thread Status:
Not open for further replies.