1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

PFS for 3200?

Discussion in 'Uncategorized Threads' started by charlevillecat, Jul 18, 2008.

Thread Status:
Not open for further replies.
  1. charlevillecat

    charlevillecat TS Member

    Joined:
    Jan 29, 1998
    Messages:
    265
    hI ADAM,I am looking for one also,if you get any information email at the above.
     
  2. ffwildcat

    ffwildcat TS Member

    Joined:
    Feb 27, 2006
    Messages:
    845
    your best bet is to get a custom grip made for the PFS. a subject search will yield several makers that produce them.

    the PFS mechanism is universal and will fit to any gun once the grip has been fabricated. in essence the grip is a short stock and bolts to the receiver just like your stock does. the PFS mechanism bolts to the grip.
     
  3. todman2

    todman2 Member

    Joined:
    Jan 15, 2007
    Messages:
    286
    Location:
    Fort Myers, Florida
    The short of it guys is a custom wood grip will cost you about $1000.00 from what I have been quoted. The next best thing is to get a Krieghoff Grip and start grinding to fit to the receiver. It will take some time and having a can of bondo or fiberglass filler on hand to fill in the voids helps. Don't get carried away with the grinding slow and easy and you will have a perfect fit. A friend of mine loves his 3200 but wanted a PFS. After he fitted and painted the grip you would have thought PFS had made it.

    Hope this helps and good luck
     
Thread Status:
Not open for further replies.