1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

perrazzi unsingle question

Discussion in 'Shooting Related Threads' started by JONNY D, Jan 2, 2013.

Thread Status:
Not open for further replies.
  1. JONNY D

    JONNY D TS Member

    Joined:
    Sep 17, 2009
    Messages:
    152
    can i fit an unsingle barrel from a mx2005 to a mx2008sc3. ive been told they do not make a unsingle for a mx2008sc3 any ideas please.
     
  2. Steve W

    Steve W Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    5,118
    Location:
    Los Angeles
    MX-2008 only came with O/Us as introduced.

    You can put it on. The rib on MXZ-2005 is kind of close to MX-2008.
     
  3. zzt

    zzt Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    3,463
    Location:
    SE PA
    If you do, your POI on the unsingle will be waaaay higher than your O/U unless you change the comb when you switch. I'm not sure you can get it low enough.

    Your best bet is to get a small add-on rib to raise the bead of the unsingle.
     
  4. BigM-Perazzi

    BigM-Perazzi Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    8,542
    Location:
    HELL, MICHIGAN
    MX2005? that's the windsurfer sail rib....
    I'd go with zzt's idea...
     
Thread Status:
Not open for further replies.