1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Perazzi Stock ID

Discussion in 'Shooting Related Threads' started by hoffman06, Jul 9, 2010.

Thread Status:
Not open for further replies.
  1. hoffman06

    hoffman06 Member

    Joined:
    May 6, 2009
    Messages:
    482
    Location:
    Marcola Oregon
    Which Perazzi's did not have drop out triggers.
    Thanks Carey
     
  2. Scoutman 06

    Scoutman 06 Member

    Joined:
    Aug 28, 2006
    Messages:
    318
    I'll go out on a limb & say MX-5,6,7,12, MT-6 & according to a discussion earlier in the week, MX-16 in 12 ga. John
     
  3. Steve W

    Steve W Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    5,116
    Location:
    Los Angeles
    Close.

    MX-5, MX-7, MX-12, MX-16, MX-2000S, MT6, MS80, Granditalia all have non-detachable trigger.
     
  4. hoffman06

    hoffman06 Member

    Joined:
    May 6, 2009
    Messages:
    482
    Location:
    Marcola Oregon
    Thank you guys, who is the best person to talk to and possibly send a stock for positive ID.
    Carey
     
  5. Steve W

    Steve W Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    5,116
    Location:
    Los Angeles
    Show a picture of the tang openings, I can help you. If it might be a TM stock, I'll need measurements. No need to send out.

    See the picture below, see if you can ID it. We go from there.


    [​IMG]
     
  6. hoffman06

    hoffman06 Member

    Joined:
    May 6, 2009
    Messages:
    482
    Location:
    Marcola Oregon
    Steve PM sent.
    Carey
     
  7. whiz white

    whiz white Strong Supporter of Trapshooting Banned

    Joined:
    Jan 29, 1998
    Messages:
    4,771
    Location:
    Rapid City SD
    The MX6 has a drop out trigger.

    There are some folks on here who know exactly the answer, like Steve W, above.

    Whiz
     
  8. Duck

    Duck Member

    Joined:
    Jan 29, 1998
    Messages:
    572
    Carey,

    Your in good hand's!.
     
  9. Steve W

    Steve W Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    5,116
    Location:
    Los Angeles
    I've replied your PM.

    If the bottom opening is noticeably shorter than the top tang, but only measureed .710" wide, it might be a TM stock.
     
  10. hoffman06

    hoffman06 Member

    Joined:
    May 6, 2009
    Messages:
    482
    Location:
    Marcola Oregon
    Thanks for all the emails Steve, I think we will get this identified yet.
    Carey
     
Thread Status:
Not open for further replies.