1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Perazzi recoil pad removal

Discussion in 'Shooting Related Threads' started by Ted K., May 23, 2011.

Thread Status:
Not open for further replies.
  1. Ted K.

    Ted K. Member

    Joined:
    Feb 8, 2009
    Messages:
    507
    Location:
    Tiburon, CA
    I'm trying to get the recoil pad off my wife's Perazzi MX2000RS. I know the pad is glued on, but it appears also to be screwed on. I can see two holes in the pad where screws normally would be, and when I look down in there I see something silver, but neither an allen wrench nor a screwdriver (phillips or flat blade) will engage.

    Does anyone know what is in there? What do I need to do to get the pad off?

    Ted K.
     
  2. mikepacific60

    mikepacific60 Member

    Joined:
    Jan 29, 1998
    Messages:
    86
    Hello Ted

    Are you sure it’s glued? The reason I ask is that I ordered my new Perazzi with a screwed on pad – when the gun arrived I tried to take the pad off (ie removed the two screws..). It wouldn’t come off!

    I put the screws back in to tackle the job another day…

    Anyway, I had another go the other night…I took out the screws and tapped the hard rubber part of the pad with a chisel…

    The pad popped off.

    The reason it didn’t come off easily is that a small bit of stock varnish was under the pad, acted like glue.

    Cheers

    Mike
     
Thread Status:
Not open for further replies.
Search tags for this page

remove perazzi shotgun but pad