1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Perazzi Rebuild

Discussion in 'Uncategorized Threads' started by OldPshtr, Jul 22, 2008.

Thread Status:
Not open for further replies.
  1. OldPshtr

    OldPshtr Member

    Joined:
    Jan 29, 1998
    Messages:
    447
    Need to rebuild locking block on TMI and replace springs. Earlier
    a gunsmith in Missouri was mentioned that rebuilt and refitted
    blocking blocks. Anyone know who it was.

    Doyal
     
  2. old tex

    old tex TS Member

    Joined:
    Jan 29, 1998
    Messages:
    314
    Skeet Sammons can do it.
     
  3. FLAKETM

    FLAKETM TS Member

    Joined:
    Jan 29, 1998
    Messages:
    458
    Giacomo is probably the most expensive but experience has shown me that if you sell your gun and note that Giacomo rebuilt it -- that goes a long way. He's got that kind of rep. I'm not knocking anybody else, mind you.
     
  4. cubancigar2000

    cubancigar2000 Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    10,521
    Location:
    Idaho
    I second Doug
     
  5. Hitapair

    Hitapair Active Member

    Joined:
    Jan 29, 1998
    Messages:
    2,344
    Pat Laib has done many of them and if the firing pin hole needs attention, will take care of that at the same time.
     
  6. TEXASBEN

    TEXASBEN Member

    Joined:
    Jan 29, 1998
    Messages:
    64
    Doyal,


    I take it is not a blacksmith in your area??


    Ben
     
  7. John Thompson

    John Thompson TS Member

    Joined:
    Aug 22, 2007
    Messages:
    756
    I have a TMX 6710, about 25 years old. This gun has close to 250,00 through it. Giacomo rebuilt the locking mechanism and re welded the locking notch in the barrel. It cost under $200. This gun is tighter than the day it was new. I have never had anybody but Giacomo work on my P-guns.
     
  8. Chango2

    Chango2 Active Member

    Joined:
    Nov 12, 2007
    Messages:
    3,518
    I would not take a Chevy to a Rolls mechanic; they are not good at porting small block heads or having a clue regarding how much came advance to run.
     
  9. OldPshtr

    OldPshtr Member

    Joined:
    Jan 29, 1998
    Messages:
    447
    Ben:
    No blacksmiths - few second rate boat fixers. Will try them.

    Doyal
     
  10. td_ict_ks

    td_ict_ks TS Member

    Joined:
    Jan 29, 1998
    Messages:
    141
    Doyal Doyal Doyal........You know who to send it to!!!
     
  11. country gentleman

    country gentleman Member

    Joined:
    Jan 29, 1998
    Messages:
    308
    Only 2 people in the world will ever touch my guns. Giacomo and Laurence Pylinski. Todd
     
  12. doberman37

    doberman37 Member

    Joined:
    Jan 7, 2008
    Messages:
    90
    I thought giacomo retired and turned the buisiness over to some one else
     
Thread Status:
Not open for further replies.
Search tags for this page
cost of a perazzi rebuild
,

perazzi rebuild

,
perazzi rebuilders