1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Perazzi part needed!

Discussion in 'Shooting Related Threads' started by gun fitter, Mar 22, 2009.

Thread Status:
Not open for further replies.
  1. gun fitter

    gun fitter TS Member

    Joined:
    Jan 29, 1998
    Messages:
    2,959
    Help! I had a shooter who's perazzi trigger group was not staying in and hard to remove. Well the tang extension which engages the trigger group was rustd and while removing the retaining plug I lost it and the spring. I put parts from my receiver in his gun. Now I need parts but Giaccomo is in Florida and I don't normaly get anything unless I talk to him. Any one have these parts I have the cone that engages the trigger groupbut need the spring and back cap.
    Joe
     
  2. Post  2

    Post 2 TS Member

    Joined:
    Jan 29, 1998
    Messages:
    468
    If you have the part numbers Giaccomo secretary can get them to you. Post-2
     
  3. joehunter

    joehunter Member

    Joined:
    Jan 29, 1998
    Messages:
    715
    Give Giacomo sporting a call. I was with Dan last week at the Southern Grand and he was sending out parts to people either from the shop or from the Silver Dollar.

    Joe
     
  4. gun fitter

    gun fitter TS Member

    Joined:
    Jan 29, 1998
    Messages:
    2,959
    Any one have a parts list or know a web address so i can get the #'s otherwise calling giacomo is no use unless i can talk to him. Besides I'm in a hurry since i gave out my parts to get some one else going.

    Joe
     
  5. bigk

    bigk TS Member

    Joined:
    Mar 16, 2007
    Messages:
    117
    If you look back about 2 weeks I think Wizz White posted a parts list.It is a download.
    k
     
  6. gun fitter

    gun fitter TS Member

    Joined:
    Jan 29, 1998
    Messages:
    2,959
    I didn't see th parts I need on whiz's list
     
  7. HSLDS

    HSLDS Well-Known Member

    Joined:
    Nov 2, 2006
    Messages:
    6,329
    Location:
    S-E PA
    Joe,

    Try this.

    David D
     
  8. Ed Y

    Ed Y TS Supporters TS Supporters

    Joined:
    Jan 29, 1998
    Messages:
    2,422
    Location:
    Warren New Jersey
    Joe,
    I have part # 119 and # 122 if you still need them.

    Ed Yanchok
     
  9. whiz white

    whiz white Strong Supporter of Trapshooting Banned

    Joined:
    Jan 29, 1998
    Messages:
    4,771
    Location:
    Rapid City SD
    Joe: Give me an address and I'll make you one of those plugs - no charge - we were talking about through PM.

    Whiz
     
  10. Ed Y

    Ed Y TS Supporters TS Supporters

    Joined:
    Jan 29, 1998
    Messages:
    2,422
    Location:
    Warren New Jersey
    Joe,
    You have email. I have the two parts here and can have them in the mail in the AM. A small plug and a conical spring? No charge, just replace them when you get the opportunity.

    Ed Yanchok
     
Thread Status:
Not open for further replies.