1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Perazzi Nickel Finish Question

Discussion in 'Shooting Related Threads' started by mflora, Feb 14, 2013.

Thread Status:
Not open for further replies.
  1. mflora

    mflora Member

    Joined:
    Jan 29, 1998
    Messages:
    501
    Location:
    Austin, Texas
    MX14L w/ tarnish like on bottom receiver edges. Is receiver coated in any way or can I Flitz away?
    Mark
     
  2. JACK

    JACK Well-Known Member Supporting Vendor

    Joined:
    Apr 28, 2006
    Messages:
    14,742
    Location:
    NW Wisconsin
    likely it is grime
     
  3. mflora

    mflora Member

    Joined:
    Jan 29, 1998
    Messages:
    501
    Location:
    Austin, Texas
    Thanks again Jack.
    Mark
     
  4. Rich Bullard Jr.

    Rich Bullard Jr. Active Member

    Joined:
    Nov 18, 2008
    Messages:
    1,047
    Location:
    Sparks, Nevada
    Flitz away!
     
  5. Hardcsh

    Hardcsh Member

    Joined:
    Feb 18, 2012
    Messages:
    63
    I was told by someone (think it was Pacific Sporting Arms)that my wife's SC3 skeet gun had a lacquer coating, so better ask an expert before using the Flitz.
     
  6. skeet_man

    skeet_man Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    10,536
    Location:
    Rochester, NY
    Flitz is also going to leave your gun with a MIRROR finish, not the matte finish it has currently. Hope you don't mind a lot of sun glare directly in your eyes.
     
  7. AAtrap

    AAtrap Well-Known Member

    Joined:
    Jul 16, 2006
    Messages:
    1,556
    Location:
    Nebraska
    Mflora, mine has done the same thing. Almost looks like rust. Haven't found anything to completely take it off. Let me know if you try the Flitz and how it worked out for you.

    Thanks, Steve
     
  8. lightning20ga

    lightning20ga Member

    Joined:
    Apr 1, 2011
    Messages:
    820
    try never dull u can pick it up at ur local hardware store
     
  9. GunDr

    GunDr Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    2,913
    Look at it close. The nickel plating is not all that great on Perazzis. I've redone a few because the plating began blistering and small spots of rust began developing. The same goes for Berettas.
     
  10. decimamas 54

    decimamas 54 Active Member

    Joined:
    Feb 8, 2007
    Messages:
    872
    Location:
    ITALY
    Many white and SC3 Perazzis have lacquer coating. Probably it is what you have.DO NOT use abrasive paste
    Marcello
     
Thread Status:
Not open for further replies.
Search tags for this page

perazzi in nickel

,

perazzi nickel finish