1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
    Dismiss Notice
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

For Sale PERAZZI MX8 STYLE SPRINGS & FIRING PINS

Discussion in 'For Sale- Vendors Only' started by Jim Flynn, Oct 7, 2016.

  1. Jim Flynn

    Jim Flynn Member Supporting Vendor

    Joined:
    Nov 25, 2007
    Messages:
    20
    Location:
    Grants Pass Oregon
    PERAZZI MX8 TUNE-UP
    To keep your Perazzi MX8 style shotgun in top shape there are a few service springs that need to be replaced on an annual basis.
    The top lever spring in these shotguns goes to full compression when the breech is opened. This is a stressful condition for any spring to be subjected to, and over a period of time the spring degrades. The top lever spring controls how tightly the locking lug engages the barrels when the breach is closed. A worn and weak top lever spring allows movement between the locking lug and the barrels and is the first turn down the road to a new locking bolt. It is much better (and a lot less expensive) to stay on top of the condition of the top lever spring.
    The ejector springs in these shotguns are a little too strong and have a tendency to throw the hulls a little harder than most people like. They also stress the ejectors unnecessarily.
    We offer a spring service kit for this shotgun that includes both size top lever springs .150 old style and .170 new style, a set of reduced power ejector springs and two new firing pin springs. All the springs are made of top quality chrome silicon wire and are preset for a long life. Follow the link below.

    J&P Custom Products, LLC | Gun Springs Manufacturing
     
    Last edited: Dec 7, 2016