1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Perazzi finish question

Discussion in 'Shooting Related Threads' started by theclaysmoker, Jan 12, 2010.

Thread Status:
Not open for further replies.
  1. theclaysmoker

    theclaysmoker TS Member

    Joined:
    Sep 20, 2008
    Messages:
    66
    Where can you buy a can of finish that will match a MX 2000. Does Perazzi have a special one they use? I accidentally sprayed some Winchester gun scrubber on the wood and it clouded the finish immediately. It's some bad stuff.
    Bob
     
  2. EuroJoe

    EuroJoe TS Supporters TS Supporters

    Joined:
    May 3, 2008
    Messages:
    3,359
    Location:
    Rockford,IL
    get some "Stock Sheen" & polish it out
     
  3. luvtrapguns

    luvtrapguns Well-Known Member

    Joined:
    Jun 19, 2009
    Messages:
    1,901
    Location:
    FL
    If left alone for a time the cloudiness may disappear as the solvents evaporate. If not, MINWAX makes a product, HELMSMAN SPAR URETHANE (clear satin), that does a pretty good job of matching the Perazzi sheen. Also available in GLOSS. Sold at most Hardware and WalMart stores. About $8.50 for an 11.5 os spray can. Hope this helps, Marc
     
  4. tinylo

    tinylo TS Member

    Joined:
    Jan 29, 1998
    Messages:
    177
    Try and polish it out with rottenstone in linseed or mineral oil. Pumice is also a choice but it's more coarse than rottenstone.

    If that doesn't make it look better then you might have to strip and refinish. I like lacquer as it's easier to repair than urethane (urethane polymerizes whereas lacquer just simply dries).
     
  5. ysr_racer

    ysr_racer Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,270
    >>HELMSMAN SPAR URETHANE (clear satin), that does a pretty good job of matching the Perazzi sheen

    Oil or water based?
     
Thread Status:
Not open for further replies.
Search tags for this page

perazzi wood finihs

,

oil vs lacquer finish on perazzi stock

,

perazzi lacquer finish

,

perazzi lacquered stock

,

perazzi stock finish

,

what finish on perazzi