1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Perazzi Chokes

Discussion in 'Shooting Related Threads' started by grand6, May 9, 2009.

Thread Status:
Not open for further replies.
  1. grand6

    grand6 TS Member

    Joined:
    Oct 20, 2008
    Messages:
    13
    Can one of you Perazzi guys tell me if all Perazzi choke threads are the same?
    I have a MK11 made in 1994-1995 are they the same as the new models?
    Thanks.
     
  2. Gregg535

    Gregg535 Member

    Joined:
    Jan 29, 1998
    Messages:
    230
    Here is a scan of their chart that might help you. One thing to look for is that some of the models in recent years have the 18.7mm bore size, while it is probable that your gun is the 18.4mm, but that size is etched on the tubes themselves.
    [​IMG]
     
  3. Steve W

    Steve W Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    5,116
    Location:
    Los Angeles
    grand6, if your gun is a 1994 or later MX-11, it'll use 4th generation chokes, the silver one in the middle.

    The factory big bore choke tubes can be used in 18.4 mm bores too, just back track the choke numbers accordingly.
     
Thread Status:
Not open for further replies.
Search tags for this page
chokes perazzi
,
les chokes perazzi
,

perazzi choke numbers

,
perazzi choke sizes
,
perazzi choke tubes 1st generation
,

perazzi chokes

,
perazzi gen 1 chokes
,
perrazi choke tube chart