1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Perazzi choke- tubes length? Help

Discussion in 'Shooting Related Threads' started by Aussie Dan, Aug 26, 2012.

Thread Status:
Not open for further replies.
  1. Aussie Dan

    Aussie Dan Member

    Joined:
    Dec 6, 2011
    Messages:
    398
    Hi Gentlemen,

    I have a Perazzi mx5 built in the year 2000 that has a screw in choke in the bottom barrel.
    I was told it would be a gen 3 choke tube, but have recently measured and am not to sure.

    The below is a picture of my factory 18.4 bore choke, measuring 1.814 inches long, beside a Muller choke supposedly for a Gen 4 Perazzi and it looks like it will fit straight in, only thing is the shoulder on the Muller starts at 1.841 inches long- 3/100 of an inch longer.

    Are my factory tubes actually a Gen 4? How long are Gen3 tubes?

    Also, noticed the Perazzi 6 choke I was using is almost the same restriction as the U3, with the Perazzi measuring from 0.730 breech to 0.700 at muzzle, and the Muller 0.729 breech to 0.702 muzzle.
    [​IMG]

    [​IMG]
     
  2. Steve W

    Steve W Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    5,097
    Location:
    Los Angeles
    It is 4th generation factory choke. 3rd generation chokes are black.
    [​IMG]
     
  3. Aussie Dan

    Aussie Dan Member

    Joined:
    Dec 6, 2011
    Messages:
    398
    Thanks Steve, looks like I'll be testing her out then!!
     
Thread Status:
Not open for further replies.
Search tags for this page

perazzi chokes for sale