1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
    Dismiss Notice
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Parting out Horvath engraved MX8

Discussion in 'For Sale- Members only' started by claybrdr, Aug 15, 2012.

Thread Status:
Not open for further replies.
  1. claybrdr

    claybrdr Well-Known Member

    Rating - 100%
    3   0   0

    Joined:
    Jan 29, 1998
    Messages:
    3,268
    MX8 action #685XX extensively engraved by Kurt Horvath. Trigger just serviced and an internal barrel selector installed by Earnest Marlette. Trigger flawless with sub-gauge tubes thanks to Earnest's wizardry! $5,500

    Custom English walnut stock just back from being refinished by Tom Smith with a new Kickeez pad. The LOP is 15 1/8 inches and the parallel comb is 1 5/8 inches of drop. There is a right hand palm swell and their seems minimal if any cast. As a matter of fact it seems to line up the same for me right or left handed but it was made for a right hander. Comes with the fore end pictured. $1,600

    Sporting 34" tapered flat rib barrels with Briley thin wall chokes. No porting. Bores are .739/.740 and weigh 1.586 kg on my postal scales with the 2 LM chokes installed. White mid-bead sight and Hi-viz front sight. Comes with six (6) Briley black oxide extended Spectrum choke tubes in Skeet, Improved cylinder, Light mod (2), Modified and Improved Mod. Comes with a set of 30" fitted Briley Ultra light sub-gauge tubes in 410, 28 and 20 ga in an old Briley Warrior soft case. I chose the 30" length to save a bit of weight. Four choke tubes per gauge. $3,000

    Not interested in trades at this time. Some pics below.
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  2. Trapshooter

    Trapshooter Well-Known Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    1,239
    Beautiful!!!
     
Thread Status:
Not open for further replies.