1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Pacific DL-105 de prime/resize sticking

Discussion in 'Shooting Related Threads' started by BBman, Mar 16, 2010.

Thread Status:
Not open for further replies.
  1. BBman

    BBman Member

    Joined:
    Jan 29, 1998
    Messages:
    33
    Cleaning/setting up my old pacific 105 for someone to use. The shell is sticking in the deprime/resize station. What is the best way to go about fixing this?
     
  2. TC

    TC TS Member

    Joined:
    Jan 29, 1998
    Messages:
    931
    What hulls are you using?
     
  3. BBman

    BBman Member

    Joined:
    Jan 29, 1998
    Messages:
    33
    Old style AA hulls. I did just grab the first one I seen laying around to "test" the deprime and the hull wasn't as smooth as a new hull would be. Could that be part of my problem?
     
  4. TC

    TC TS Member

    Joined:
    Jan 29, 1998
    Messages:
    931
    I have had problems with steel based hulls and would not reccomend them. Some times hulls that came out of an oversize chamber can be a little tight. Check to see that the inside of the sizer is clean and not rusted or pitted. They will rust.
     
  5. omgb

    omgb Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    1,759
    Location:
    Santa Clarita, CA
    A little extra fine emery cloth and some light oil should do the trick
     
  6. short shucker

    short shucker TS Member

    Joined:
    Jan 29, 1998
    Messages:
    3,939
    omgb has the right info for this one.

    Just clean the inside up and lube very lightly. They will get a little oxidation in them from time to time and need to be cleaned out.

    ss
     
Thread Status:
Not open for further replies.