1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

P/W 900/950 Question

Discussion in 'Shooting Related Threads' started by skeeljc, Feb 26, 2010.

Thread Status:
Not open for further replies.
  1. skeeljc

    skeeljc Supporting Vendor Supporting Vendor

    Joined:
    Aug 27, 2007
    Messages:
    3,746
    Location:
    Terre Haute Indiana
    Can I put 900 tooling on a P/W 950 Elite?

    Jim Skeel
     
  2. oz

    oz Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,817
    check PW site they make conversion units
     
  3. oleolliedawg

    oleolliedawg Banned User Banned TS Supporters

    Joined:
    Jan 29, 1998
    Messages:
    10,124
    Location:
    Northampton PA
    Do it-a much better setup!!
     
  4. locdoc

    locdoc Member

    Joined:
    Jan 29, 1998
    Messages:
    874
    Location:
    Antrim, NH
    Yes you can, Jim. Easier than going the other way (900 or platinum to 950)

    Doug Whiton, P/W dealer/dist
     
  5. skeeljc

    skeeljc Supporting Vendor Supporting Vendor

    Joined:
    Aug 27, 2007
    Messages:
    3,746
    Location:
    Terre Haute Indiana
    Doug, Why is it easier 950 to 900?

    Jim Skeel
     
  6. locdoc

    locdoc Member

    Joined:
    Jan 29, 1998
    Messages:
    874
    Location:
    Antrim, NH
    Jim,

    Because you can buy just the 900 tooling and all items are included no matter whice gauge you go to. If you have a 900 and go to a 950 in the same ga. then you also need the depriming tool which has the resizing sleeve on it AND the final crimp tool that also has a full length housing on it.

    If you change from, let's say a 20 ga 900 to a 12 ga 950 then you just get the 950/12 conversion kit. All the parts are included. At one time available in three gauges. Now just in 12 ga.

    Doug
     
Thread Status:
Not open for further replies.