1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

P-W 800B Information needed

Discussion in 'Shooting Related Threads' started by fishguts, Nov 27, 2010.

Thread Status:
Not open for further replies.
  1. fishguts

    fishguts Member

    Joined:
    Jan 29, 1998
    Messages:
    741
    P-W 800B #15692, has the updated top plate to allow bushing change out but how do you do it?

    Thanks,

    Wayne
     
  2. Unknown1

    Unknown1 Well-Known Member

    Joined:
    Nov 5, 2009
    Messages:
    3,402
    <UL><LI>Turn off the shot or powder<LI>Cycle an empty hull under the drop tube of the bushing you want to change<LI>With the handle all the way back toward you, open/close the drop to empty the bushing<LI>Loosen the knob and remove the steel slug at the base of the shot or powder hopper<LI>Grab the end of the rack (straight gear) that operates the bushing gears and pull it all the way toward you<LI>Use a .50 cal bore brush or similar tool to remove the bushing from the hole left by removing the steel slug<LI>Change the bushing and replace the slug</UL>
     
  3. fishguts

    fishguts Member

    Joined:
    Jan 29, 1998
    Messages:
    741
    Thank You

    Wayne
     
  4. whiz white

    whiz white Strong Supporter of Trapshooting Banned

    Joined:
    Jan 29, 1998
    Messages:
    4,771
    Location:
    Rapid City SD
    Good one, Unknown1.

    Thanks.
     
  5. whiz white

    whiz white Strong Supporter of Trapshooting Banned

    Joined:
    Jan 29, 1998
    Messages:
    4,771
    Location:
    Rapid City SD
    Good one, Unknown1.

    Thanks.
     
Thread Status:
Not open for further replies.