1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

P/W 800+ question

Discussion in 'Shooting Related Threads' started by headhunter, Dec 5, 2010.

Thread Status:
Not open for further replies.
  1. headhunter

    headhunter Well-Known Member

    Joined:
    Feb 25, 2008
    Messages:
    1,015
    With the autodrive installed on the 800+, it doesn't look like there is enough room for the completed shells to discharge between the loader and the motor. How is this set up for dischargeing?
     
  2. kd185

    kd185 Member

    Joined:
    Jul 22, 2010
    Messages:
    146
    I have mine set up to discharge the completed shells out the front and discharge the spent primers out the bottom
     
  3. Herman63

    Herman63 Member

    Joined:
    Oct 1, 2006
    Messages:
    372
    Under the the motor you will see a opening I cut a hole in my bench and added pvc tubing to aim them into a bucket.

    I would snap a picture but sent my loader off to the Whiz.

    Herman63 from KY
     
  4. skeeljc

    skeeljc Supporting Vendor Supporting Vendor

    Joined:
    Aug 27, 2007
    Messages:
    3,753
    Location:
    Terre Haute Indiana
    Here is my setup.


    [​IMG]


    [​IMG]


    Jim Skeel P/W Dealer/Distributor
     
Thread Status:
Not open for further replies.