1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

P/W 375 need info.

Discussion in 'Shooting Related Threads' started by 85TTR, Sep 19, 2011.

Thread Status:
Not open for further replies.
  1. 85TTR

    85TTR Member

    Joined:
    Dec 29, 2008
    Messages:
    66
    I would like to make a Roller handle for the P/W 375.

    If someone has one I need the measurment from the center of the 5/8 ball handle now on the loader to the first thing the roller handle will hit to the left so I can make the offset to the new handle. Thanks Paul.
     
  2. Oregunner

    Oregunner Well-Known Member

    Joined:
    Aug 15, 2006
    Messages:
    3,327
    Location:
    Oregon
    The distance from the center of the rod that you pull down, to the edge of the powder tube, which is beside the Ball Handle when it is in the up position, is 1 7/8". Mine has some wiggle in it and I can pull it over to within 1 3/4".
     
  3. 85TTR

    85TTR Member

    Joined:
    Dec 29, 2008
    Messages:
    66
    Thank you very much. Paul
     
Thread Status:
Not open for further replies.