1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

oz loads with American seclect

Discussion in 'Uncategorized Threads' started by uncle chuck, Aug 24, 2007.

Thread Status:
Not open for further replies.
  1. uncle chuck

    uncle chuck TS Member

    Joined:
    Jan 29, 1998
    Messages:
    26
    Anyone use American Seclect with oz loads with good results.
    TY
     
  2. djpk69

    djpk69 TS Member

    Joined:
    Jan 29, 1998
    Messages:
    725
    Try 20 grains/TGT12 wad/Rem 209 primer........about 1220FPS
     
  3. phirel

    phirel TS Member

    Joined:
    Jan 29, 1998
    Messages:
    9,556
    I have used American Select for all of my 1 oz loads and my 1 1/8 oz singles loads. Check the Alliant web site for the proper powder charges for your components. American Select is an excellent powder.

    Pat Ireland
     
  4. zzt

    zzt Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    3,463
    Location:
    SE PA
    One of my favorite 1oz loads is right out of the Alliant reloading guide. STS hull, STS 209 primer, 17gr Am Sel, TGT-12 wad and 1oz shot. Manual says 1150fps @ 6925psi. Velocity checks out on my chrono. Works extremely well in spite of the low pressure.
     
  5. titan79

    titan79 TS Member

    Joined:
    Jan 29, 1998
    Messages:
    32
    Ditto to zzt's post. Pretty soft and clean.
     
Thread Status:
Not open for further replies.